转载原文：https://www.reddit.com/r/OculusQuest/comments/mwgrob/appairlinknow_helps_you_launch_air_link_now/
介绍
由于[color=var(--newCommunityTheme-linkText)]/ u / 99spider和 [color=var(--newCommunityTheme-linkText)]/ u / wescotte的辛勤工作，现在可以在Oculus启用之前启用Air Link！您可以[color=var(--newCommunityTheme-linkText)]在这里找到他们的原创作品。 我创建了一个应用程序，可让您直接从Oculus Quest 1或2头戴式耳机内启动Air Link ...无需费心ADB来启动它！ 先决条件
在安装此应用之前，请确保您已完成以下操作： 如何安装和使用应用程序
如何安装APK： 或者 然后，您可以从应用程序集合中启动该应用程序，确保选择“未知来源”以显示该应用程序。打开应用程序后， 该应用程序将保留您最后输入的IP和端口。请注意，每次您在Oculus Rift应用程序中切换Air Link功能时，端口号都会更改-发生这种情况时，只需再次单击“扫描”即可。 但是请注意，端口扫描功能并非万无一失：如果您PC上的另一个应用程序正在侦听与Air Link相同的端口范围，则可能会误判该端口。最好的缓解方法是禁用该冲突的应用程序。但是，如果无法实现，请参考下面的“故障排除”部分，以手动找到正确的端口。 #Update：v2.0.0：添加了端口扫描功能。现在，您只需键入PC的IP，然后单击“扫描”，它将为Air Link找到正确的端口！还添加了“退出”按钮，可以更轻松地退出该应用程序。 故障排除
在Oculus Rift PC应用程序中禁用Air Link。 打开资源监视器，然后打开“网络”选项卡 在Oculus Rift PC应用中启用Air Link。 在列表中找到“ OVRServer_x64.exe”，然后进行检查。 在“侦听”部分下查找要使用的正确端口。 在应用程序中填写该端口。
[color=var(--posttitletextcolor)][App]AirLinkNow - Helps you launch Air Link NOW!
Wireless PC Streaming/Oculus Link
Intro
Thanks to hard work from [color=var(--newCommunityTheme-linkText)] /u/99spider, [color=var(--newCommunityTheme-linkText)] /u/wescotte, it is now possible to enable Air Link before Oculus enables it! You can find their original work [color=var(--newCommunityTheme-linkText)] here. I have created an app that lets you launch Air Link directly from within the Oculus Quest 1 or 2 headset...no need to keep fiddling with ADB to launch it! Prerequisites
Before you install this app, please make sure you've completed the following: make sure both your Quest 1 or 2 and your PC are running v28 software you see "Air Link" as an available option under "Settings -> Beta" in the Oculus Rift PC app you have ADB set up and available in your command line. (If you have SideQuest installed and set up, you already have ADB set up)
How to install and use the app
How to install the APK: or You can then launch the app from your apps collection, make sure to select "Unknown sources" to show the app. After opening the app, Launch the Oculus Rift app on your PC. Enable "Air Link" in the Oculus Rift App under Settings -> Beta. Type in the IP address of your PC. (Do NOT press the "Done" button on the keyboard - this will insert a space character in there and mess it up!) Click the "Scan" button to scan for the Air Link port. Click "Launch Air Link".
This app will preserve your last entered IP and port. Please note that the port number changes every time you toggle the Air Link feature in the Oculus Rift app - when this happens, simply click "Scan" again. Note however that the port-scanning feature is not fool-proof: if another app on your PC is listening on the same port range as Air Link, it could get picked up as a false positive. Best mitigation would be to disable that conflicting app. However, if that's not possible, please refer to the troubleshooting section below to manually find the correct port. #Update: v2.0.0: Added port scan feature. Now you can simply type in your PC's IP, and then click "Scan" and it will find the correct port for Air Link! Also added a "quit" button to make it easier to quit the app. Troubleshooting
"I know the IP and port are correct, but it connects, shows 3 dots, then disconnects" - Try disabling any custom settings set in the Oculus Debug Tool (such as custom bitrate). And make sure your firewall isn't blocking anything. "Port scanner fills in wrong port" - This can happen if you have another app on your PC listening in the same port range as Air Link. Best mitigation would be to disable that conflicting app. However, if that's not possible, follow these steps to find the correct port manually:
Disable Air Link in the Oculus Rift PC app. Open Resource Monitor and open the Network tab Enable Air Link in the Oculus Rift PC app. Find "OVRServer_x64.exe" in the list, and check it. Look under the "Listening" section for the right port to use. Fill in that port in the app.
| 
发表于 2021-4-23 15:23:02
